10 Inch Flanged Gate Valve
When the 10 Inch flanged gate valve closes, the sealing surface can be sealed only by the medium pressure, that is to say, the sealing surface of the gate can be pressed to the seat on the other side to ensure the tightness.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Introduction
10 Inch Flanged Gate Valve is a gate valve with a flange connection. This is a very common connection method because it is stable and reliable when used in pipelines, so it is very suitable for high-pressure pipelines. The gate is an opening and closing part, and the movement direction of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. There are many kinds of our products, which are very suitable for pipelines in various industries such as petroleum, chemical, fertilizer, and electric power because of their high pressure and wide working temperature range. The medium used is water, oil, steam, acid medium, etc.
Advantage:
1. The same straight-through structure and flow channel greatly reduce the flow coefficient and energy loss, and significantly improve the life and performance of the 10 Inch Flanged Gate Valve.
2. The valve adopts a pressure self-sealing structure, so the sealing performance is good.
3. The sealing surface of the gate valve and valve seat is made of hard alloy, which is wear-resistant, high-temperature-resistant, corrosion-resistant, and wear-resistant.
4. The valve stem surface has good nitriding resistance.
5. The hoist structure can be designed as single-layer, double-layer, and parallel.
Design Description:
- external thread and yoke
- pressure seal
- rising stem
-Gear operator, electric actuator, pneumatic actuator, bypass, locking device, sprocket, extension rod, and hood to meet customer requirements.
- flange and docking welding brake valve
- Can provide different types of disks
- Low torque design, surface light slide rod.
Details
Brand | GangYe |
Valve Material | Gangye provide cast steel, stainless steel, special alloy steel, Chrome-moly steel |
Valve Type | Rising Stem, PSB, FB, OS&Y |
Valve Test | 100% quantity tested before delivery |
Valve Guarantee | 18 months after shipments and 12 months after installed |
Valve Structure | Gate Valve |
Valve Delivery | 15 - 30 days |
Valve Sample | Sample Available by Gangye Valve |
Valve Color | Customer request |
Valve Packing | Plywood Case for Gate Valve |
MOQ | 1 Set |
Valve Certificate | API6D/ CE/ ISO9001/ ISO14001 |
Place of Origin | Zhejiang, China (Mainland) |
Delivery Detail: | Shipped in 15-30 days after payment |
Port | Shanghai Or Ningbo |
Payment Terms | L/C, T/T, Western Union |
Structure | 10 Inch Flanged Gate Valve |
Installation procedure:
1. Mark the vertical center line of the water outlet and the height line of the bottom of the gate valve according to the design, and the deviation is required to be less than ±10mm. At the same time, check whether the center of the door hoisting hole is aligned with the support hole reserved by the hoist;
2. Lift the gate valve to ensure that it can remain stable and not shake.
3. Remove the gate valve on the wall, adjust the door body to adjust the horizontal and vertical (the horizontal and vertical door frame and the door frame of the side slot do not exceed 1/1000), the connecting gate valve frame is embedded, and the secondary castings take effective sealing measures. Make sure there is no gap between the gate valve frame and the structure.
No Information
